Mobius Trimmer M108S Automatic Wet & Dry Bud Trimmer Machine
The Mobius M108S Automated Wet and Dry Trimmer utilizes three TriFlex blades for a total of 108” of cut length that flex against each other to deliver precision trim rivaling hand-trim quality. The M108S can be broken down with no tools other than the Mobius Spring Jack. The integrated trim separator with smooth internal surfaces and no hoses means the Mobius M108S is especially easy to clean for its size and is well suited for a GMP-certified facility. Whether you’re trimming wet or dry, the M108S is a powerful trimming solution for any modern harvest situation.
Product Downloads
Mobius M108S Manual
Mobius M108S Tech Specs
Mobius M108S Brochure
What's Included
- Mobius Trimmer M108S
- Air Pump
- Output Chute
- Trim Tote with Gasket
- Electrical Box Filter
- Airthread Tension Tumbler
- Input Hopper
- Sensor Override Pucks
- Spring Jack Tool
Gentle On Flower
The experts at Mobius know that it’s important your flower needs to spend as little time as possible touching the tumbler and as few rotations as possible. The M108S is gentle on your flower, moving it through the trimmer efficiently, with plenty of blade access, and supported by a tumbler with minimal surface area to block it or collect resin.
The Mobius AirThread Tension Tumbler is made from stainless steel so your plant material has very little surface to come in contact with and has more access to blades than any other trimmer so rosin stays on the flower where it belongs. Three independent blade cartridges offer three times the cutting power, resulting in material trimmed to perfection at a quality and rate unmatched by any other material trimming machine on the market.
Easy To Clean
The semi-enclosed M108S creates less mess and is also easy and quick to clean – reducing labor costs. Breaking down the M108S is virtually tool-free and it’s design ensures all components that come in contact with plants are “hot swappable“ in minutes. Being able to quickly replace dirty components with clean ones increases production time, keeping your trim-team trimming, while your sanitation crew cleans in parallel.
Good Manufacturing Practices, commonly referred to as GMP, are an internationally harmonized set of standards that ensure manufacturing facilities are clean, and produce products for human consumption that are both consistent and free from cross contamination. The M108S is a perfect fit for GMP certified organizations because its smooth internal surfaces and high-quality construction materials make it easy to clean. It is also designed without the use of hoses that are almost impossible to clean to GMP standards.
Simple & Safe
The M108S uses a variety of indicator lights and sensor technology to offer a safe and worry-free trimming experience. The system automatically shuts down if a panel is removed, the lid opens, the in-feed hopper or output chute are misaligned, or the trim-tote is full. The tumbler chamber glows red to immediately indicate a fault status, blue to denote ready for trimming, and white when in operation.
The Spring Jack
Our Spring Jack Tool is the key to quickly achieving ideal and consistent tumbler tension. It’s the only tool you’ll need to disassemble the M108S for cleaning. When affixed to the lid, the Spring Jack compresses and releases spring tension holding the tumbler in place, allowing it to be effortlessly removed. When the tumbler is installed, our Spring Tension Technology holds it tight until you are ready to remove it, eliminating the possibility of user error.
Feed Rate
|
ONE MOBIUS UNIT |
TWO MOBIUS UNITS |
Wet |
66 – 120 lbs/hr | 30 – 55 kg/hr |
110 – 260 lbs/hr | 50 – 120 kg/hr |
Dry |
30 – 60 lbs/hr | 13 – 30 kg/hr |
70 – 140 lbs/hr | 30 – 65 kg/hr |
Product Details
-
Construction: Anodized Aluminum & 304 Stainless Steel
-
Speed adjustment: 1-11
-
Number of blades: 3
-
Blade treatment: Nitrided
-
Vacuum motor: 5 hp
-
Tumbler motor 1/8 hp
-
Cutter motor: 3/4 hp
-
Tool-less disassembly: Yes
-
Tandem ready: Yes
-
Integrated tilt angle: Yes
-
Fits through a 32" door: Yes
-
Tumbler diameter: 8″
-
Tumbler length: 36″
-
Certifications: ETL (CSA & UL equivalent)
Mobius M108S Trimmer Specifications
Type |
Tumbler
|
Material |
Wet & Dry
|
Capacity |
120 lbs
|
Performance Wet
|
120 lb/hr |
Performance Dry |
60 lb/hr |
Feed Type |
Continuous |
Dimensions |
43" x 43.5" x 47" |
Weight |
450 lbs |
Warranty |
1 year |